- Place of Origin: Henan, China (Mainland)
- Brand Name: XINFU
- Model Number: APEX-YLF
- product name: Granular powder food metal detector
- te of detection: ≥3m3/Hz~≥5m3/Hz
- SPECIFIES: metal gold detector
- power: 200W
- Waterproof performance: good
- voltage: 220V/50Hz
- size: 700* 440*1100mm
- width of detection: 150mm
- weight: 120Kg
- USE: metal gold detector
Packaging & Delivery
|Packaging Details:||metal gold detector Carton Package|
- Professional Team manufactures Excellent Equipments, thus achieved proud credits.
APEX-YLF metal gold detector Operating Instructions:
1. Objective: To standardize the metal gold detector operation, calibration to ensure that the judgment on the metal products and foreign objects, to improve product quality protection.
2. Scope: metal gold detector Suitable for workshop metal gold detector.
3. test block: standard Fe (1.0mm, 1.2mm, 1.5mm), standard SUS (1.2mm 1.5mm)
4.1 Requirements: workshop metal gold detector operator must go through the training of the engineering department qualified and the induction letter of appointment approved by the Administration Department of the Company to posts.
4.2 operating requirements: metal gold detector to operate in strict accordance with the operating specifications. by the person responsible, not string Kong.
4.3 calibration requirements:
4.3.1 Instrument familiarity with the product requirements: each batch of products must be extracted before the official gold seized 10 bags / bottles instrument familiar, if an alarm will have to adjust the instrument parameters, no alarm to the next step.
4.3.2 standard test block requirements:
1, the standard test block detection:
Followed by the standard test block the (workshop Fe1.0mm SUS1.2mm; workshop Fe1.0mm; four workshops Fe1.0mm, SUS1.2mm) on a conveyor belt left, middle and right three, the detector should be able to alarm and Stop Running (each test Block 3);
2, the analog metal gold detector:
Standard test blocks were put in the upper portion of the item, the lower portion of through the detectors conveyor left, middle, and right position detector should be able to alarm and stop the run (each test block 6);
4.3.3 Calibration frequency:
1 daily workshop before being put into self-calibration;
2 use during the workshop operatives calibration once every half hour; quality control department irregular spot checks;
3 record of each calibration results, workshop and quality control of fill metal gold detector calibration record sheet.
4.3.4 metal gold detector eligibility criteria:
Each test metal gold detectors can alarm and stop the run, then metal gold detector sensitivity qualified;
Any alarm detection is illustrated metal gold detector sensitivity unstable, continuous detection should be in the same position three times, three times can be detected may prove sensitivity qualified, If you still can not be detected immediately stop operation immediately on the sensitivity and other parameters can be adjusted, should be re-adjusted once the detection; continue to test after passing the product.
5 product testing
The 5.3 metal gold detector before starting the detection must be 30 minutes early to warm up;
5.4 All products must go through the metal gold detector;
5.5 must be calibrated direction, through a metal gold detector;
5.6 Alarm processing
5.6.1 detector alarm, in the same direction by duplicate detection 3, such as 3 times alarm can not be adopted; arbitrary alarm can not flow into the next step.
5.6.2 eventually failed to pass the metal gold detector products, should be ready clearly marked, immediately after the metal gold detector again, if the two directions are not alarm can be judged as qualified products. still alarm, the penalty for the presence of metal impurities , eye-catching logo affixed immediately and isolation.
5.6.3 The quality control officer to be checked to determine the presence of metallic impurities.
5.6.4 quality control officer Paste the metal fragments in gold exploration record sheet and to identify its source.
5.6.5 Once the metallic impurities found in the product should be detected in time, the product, the type of metal, the number recorded in the metal gold detector record sheet.
5.6.6 quality control members report HACCP team to carry out the CCP corrective action and fill in the relevant records.
Features of APEX-YLF metal gold detector :
1.Strong pinpointing performance:
2.Can penetrate the earth, the stone, the chinaware or other plastic and wooden material
which covered on the metal and find the metal exactly.
3.Easy operation and convenient to take with
4.Mainly function :
Suitable to detect and distinguish metal buried in the earth
Suitable for checking metal in food, fuel, and luggage
Suitable for detecting underground pipes
Suitable for mining and archeological digs
5.Have the function to distinguish ferrous and Non-ferrous Metal.
6.Adopt the intellectualized operation system
7.Use the high strength material of ABS with light weight and long life-span
Please read the user operating manual carefully before use this instrument.To avoid damage, please check this instrument and every button before electrify
the APEX-YLF metal gold detector parameters :
|Product Name||Underground metal detection equipment||Hand-held metal gold detectors||Food metal detection equipment|
|Meet the standard||GB 15210-1994 through metal gold detector door general technical conditions "national standards||GB 15210-1994 through metal gold detector door general technical conditions "national standards||GB 15210-1994 through metal gold detector door general technical conditions "national standards|
|Power supply||12V 1.2Ah (B) 5V 1800mAh (machine)||Standard 6F22 9V battery or rechargeable battery (optional)||220V|
|Signal frequency||360-455Hz (the B detection)||about 25KHz||50HZ|
|Total weight||7.5kg||400g (without batteries)||140Kg|
640mm(L) x 320mm(W) x 120mm(H)
|37.5 (L) x 7.5 (W) x 3.5 (H) cm||1200mm(L)*680mm(W)*910mm(H)|